MFI Throttle Housings and Intake Stacks for 1969 911S

MFI Throttle Housings and Intake Stacks as typical for 1969 through 1971 model years.  Complete restoration including:

-bored and new throttle plates

-new journals; extend full length of available housing

-shimmed throttle shafts to control end-float

-new 8mm ball studs on lever arms

-new 8mm ball sockets

-bench-set for air flow and throttle stop screws

-OEM magnesium chromate finish applied after machine work

Completely restored set of MFI throttle housings and intake stacks for 1969 911S.

Completely restored set of MFI throttle housings and intake stacks for 1969 911S.

Aluminum connecting rods with paint-stripes applied to locking nuts at ball sockets after flow adjusting procedure is completed.

Aluminum connecting rods with paint-stripes applied to locking nuts at ball sockets after flow adjusting procedure is completed.

Throttle stop screws with paint stripes applied after flow adjustments completed.

Throttle stop screws with paint stripes applied after flow adjustments completed.

Completed throttle housings.

Completed throttle housings.

One of the throttle housings with intake stacks as received.

One of the throttle housings with intake stacks as received.